RC522 RFID module with card access for Arduino

RC522 RFID module with card access for Arduino

    Specifications:
  • Based on chip MFRC522;
  • Power supply voltage: 3.3V;
  • Current consumption: 13-26mA
  • In standby mode: 10-13ma
  • Sleep mode: less than 80 uA
  • Operating frequency: 13.56MHz
  • Read Range: 0 ~ 60 mm
  • Interface: SPI, the maximum transmission rate of 10 Mbit / s
  • Size: 40mm x 60mm
  • Read and write RFID-tags.
К-во Price
От1шт94.15грн
От3шт86.62грн
От12шт78.14грн
От26шт70.61грн
Code: 98
шт.

RC522 RFID module with card access for Arduino is an RFID-modulus frequency 13.56 MHz SPI-interface.

Module RC522 RC has 8 pins:

  • VCC - Power. It is necessary to 3.3V;
  • RST - Reset. Reset line;
  • GND - Ground. Earth;
  • MISO - Master Input Slave Output - data from the slave to the master, SPI;
  • MOSI - Master Output Slave Input - data from the master to the slave, SPI;
  • SCK - Serial Clock - clock signal, SPI;
  • NSS - Slave Select - Slave Select, SPI;
  • IRQ - interrupt line.

RC522 RFID module with card access for Arduino can be used for a variety of amateur and commercial purposes, including such as:

  • Automatic lock to open the door, drawer, cabinet;
  • programmer for interphone keys;
  • the organization of inventory control;
  • access control, etc.

Included with the module RC522 is a 2 RFID-tags - in the form of cards and key fob.