Instrumentation > Temperature Controllers

Digital    thermostat -50 ° C ~ 110 ° C

Digital thermostat -50 ° C ~ 110 ° C

Features:

  • Power consumption: DC 12V
  • Temperature measuring range: -50 ° C ~ 110 ° C
  • Temperature measurement accuracy:     
          
    • in the range of -9,9 ° C to 99,9 ° C: 0,1 °;     
    • other temperature ranges -50 ° C ~ 110 ° C: 1 ° C     
  • The accuracy of hysteresis: 0,1 ° C
  • Measuring input: NTC
  • Waterproof sensor with 0.5 m cable
  • Refresh Rate: 0.5s
  • Current consumption: 35mA - 65mA
  • Relay output: 1 pole 150V
  • Display type: seven-segment LED-display
Count Price
From1шт154грн
From4шт150грн
Code: 12
шт.
assemble your own
Є в наявності

Переглянути відгуки (0)

Digital thermostat -50 ° C ~ 110 ° C is designed to maintain the required temperature values ​​within a certain range. This high-precision thermostat is used for cooling and heating devices and works in a temperature range from -50 ° C to + 110 ° C.

In digital thermostat -50 ° C ~ 110 ° C exhibited a range of the temperature, there is a delay in the start, as well as temperature calibration.

It feeds the thermostat from 12 different low power consumption. In thermostat -50 ° C ~ 110 ° C installed digital temperature indicator and mode, there are 3 buttons programming and remote temperature sensor.

Using thermostat -50 ° C ~ 110 ° C

  • Getting Started thermostat -50 ° C ~ 110 ° C
    • Connect the power supply. The display shows the actual temperature sensor.
    • Press the SET. The display flashes.
    • Press "+" or "-" to set the desired temperature shutdown.
    • Press the SET button to confirm the setting temperature
  • Display thermostat -50 ° C ~ 110 ° C
    • When the switch is turned off (for example, in the case of an open circuit) LED will be off.
    • If the seven-segment LED display shows:   
      • "LL" - temperature sensor wires are open;
      • "HH" - sensor measures the temperature of its range;
      • "---" - relay is closed (high temperature protection mode).   
  • The settings of thermostat -50 ° C ~ 110 ° C

    To change the thermostat, press and hold for about 5 seconds the button «SET». Go to the menu thermostat function P0-P6 (switching between them - "+" or "-").

    After changing settings, press the SET button and wait - the display will return to normal operation.  

  • Function parameters and settings thermostat -50 ° C ~ 110 ° C
    • P0 - Sets the cooling or heating ("C" or "H").

      This parameter adjusts the output relay "closed" to "open" and vice versa.

    • P1 - sets the hysteresis.

      (The difference between the temperature at which the thermostat turns the load and the temperature at which it again turns it off is called hysteresis. Without this hysteresis thermostat almost every second would include on and off load.)

    • P2 - sets the upper limit of the operating temperature range thermostats.
    • P3 - sets the lower limit of the operating temperature range thermostats.
    • P4 - sets the offset temperature.

      (This parameter is used when the sensor has a long cable and additional cable length affect the true value of the read temperature.)

    • P5 - device sets the delay time in the range of 1 to 10 minutes.
    • P6 - sets the high temperature alarm (relay off and display "---" when the temperature reaches the value set in this parameter).
     

    To restore the factory settings, press and hold the "+" and "-" together for 10 seconds.

Digital thermostat -50 ° C ~ 110 ° C can be used for refrigerators and heaters, as well as to adjust the temperature in the room, aquarium, incubator etc.


Reviews of the Digital thermostat -50 ° C ~ 110 ° C: