Syma X5-1 quadrocopter

Syma X5-1 quadrocopter

Characteristics:
  • Model: H5-1 (without camera)
  • Material: metal + plastic
  • Engine: brush motor  
  • Frequency: 2.4GHz  
  • The number of channels: 4  
  • Mode: Mode 2  
  • Range of reception: 150 meters  
  • Transmitter Power Supply: 4 x 1.5V AA battery  
  • Battery: 500mAh 3.7V li-po  
  • Charging Voltage: 5 V  
  • Charge time: about 1 hour  
  • The flight time: 6-8 minutes  
  • Weight: 101 grams  
  • Dimensions: 31.0 x 31.0 x 8 cm
Price:
1056 грн
Code: 672
шт.

Syma X5-1 quadrocopter is available in trim level: X5-1 helicopter without a camera.

Рackage includes:

  • 1 x Syma X5C-1 quadrocopter
  • 1 x 2.4G control equipment
  • 1 x USB charger
  • rechargeable batteries (the availability and amount depends on the configuration)
  • 4 x spare screws
  • 4 x screws for protection
  • 1 x pair of legs
  • 1 x Screwdriver
  • 1 x instruction.

Thanks to its special design, Syma X5-1 quadrocopter can fly both indoors and outdoors in high winds. Quadrocopters able to perform routine aircraft movement and revolution 360 S. flight stability provides a gyroscope.

The equipment management Syma X5-1 quadrocopters has a frequency of 2.4 GHz, so the model has a large control range, noise immunity, characterized by stable radio transmission and low power consumption.

Syma pult

Assign control panel keys Syma X5C-1 quadrocopters :

  • Handle:
    • Left - Gas \ twist
    • Right - flying forward \ back \ left \ right.
  • On the sides of the stick all the standard trim tabs to adjust the tilt in different directions.
  • At the top are two additional buttons -
    • left switch costs (Lo \ Hi),
    • Right is responsible for flips.

Flight range Syma X5C-1 quadrocopters up to 50 m with a loss of communication Syma X5C-1 quadrocopter motors off if the connection is established again -. Control returns automatically. When the battery discharges quadrocopter gradually descends within 5-10 seconds.

The model Syma X5C-1 quadrocopters is suitable for both beginners and for experienced modelers.