Balancer GreenChip B200
- Model Balancer GreenChip B200
- The number of channels - 2
- the default balancing voltage - 14.5 V on the battery
- triggering voltage adjustment range - 12.5 - 17 V on the battery
- The mean point (balancing start) - 50 mV
- balancing current - 0.7 A
- The level of rejection (including anxiety) - 50 mV
- Terminals - Output 2h1.5 mm2
- Dimensions - 70 x 70 x 27 mm
- Operating temperature from -30 ° C to +50 ° C
- Weight - 0.25lbs Ul>
Переглянути відгуки (0)
Battery - one of the main pieces of equipment and stand-alone backup power, including solar power. Its cost is 30-40% of the cost of all the equipment and the question of increasing the service life of the impact and effectiveness of the stored energy is very serious. Often the battery does not fulfill its resources and its accounts ahead of time replaced by a new one. It happens to the batteries, which are connected in series.
Semidetached section of the battery are not identical, so when charging the maximum permissible voltage at each of the sections takes place at different times. There is a situation when we have to stop charging, as the voltage on one section has already reached the maximum threshold. At the same time, the other sections remain nedozaryazhennymi. As a result, it is understood that the total capacity of the battery decreases. To avoid this, you need special equipment balancer .
The balance for Battery monitors the voltage of the battery in a separate section. Once the voltage on it when charging reaches a certain value, balancer for lead-acid battery gives the command to switch the power key, which is connected in parallel with a rechargeable section ballast. At the same time charging the remaining sections, the tension which has not yet reached the maximum permissible values - will continue. Ends the charge process that will work Balancers of all sections of the battery. The voltage on all sections will be the same, and equal to the threshold, which set up Balancers .
The balance GreenChip B200 is an important component of the solar plant. After using the solar often necessary to appliances and equipment and working in the absence of sunlight. You need to accumulate solar energy generated during the day in the batteries for later use. The best for this purpose are lead-acid batteries , which, in turn, need to be balanced.