380A 22s BLDC motor controller
- Specifications:
- Model: F-22S-380A-A
- Application: Aircraft (airplane, paraglider)
- Size: 155*65*40mm
- Weight: 462g
- Voltage: 2-22S
- Peak Amps: 380A
- Box Programming support: Yes
- Computer Programming support: Yes
- Wires: 8AWG
- BEC (Volts/Amps): OPTO
- Material: Plastic
- Type of plastic: ABS
- Remote control: Hobby RC
Переглянути відгуки (0)
380A 22s BLDC motor controller
The stroke controller for brushless motors is a programmable device that controls all important operating parameters of the motor (start mode, motor cut-off type, brake type, throttle mode, reverse, current limit, etc.).
The380A 22s BLDC motor controller (speed controller or brushless motor drive, ESC - Electronic Speed Controller) is a device that allows you to accurately vary the electrical power that is supplied to the electric motor. Also, the controller allows you to change the speed and direction of the motor. The speed controller turns on the windings in such a way that the vectors of the magnetic fields of the armature and stator are perpendicular to each other. In other words, this drive controls the torque acting on the armature of the brushless motor.
- Programmable functions of 380A 22s BLDC motor controller
- Reverse - on / off
- Timing: 0 ° to 30 °.
- Frequency - 8 kHz, 16 kHz, 32 kHz.
- Start mode - soft / medium / hard.
- Battery type - NiCd / NiMh, Li-Ion / Li-Pol, LiFe.
- Motor cut-off voltage (NiCd / NiMH) - 0.4V-1.0V × 0.05 (cut-off voltage is 5% when connected).
- Motor cut-off voltage (Li-Ion / Li-Pol) - 2.0V-3.6V.
- Motor cut-off voltage (LiFe) - 2.2V-2.8V.
- Cut-off type - smooth, hard.
- Limited power - Off, 75%, 50%, 25%.
- Limited reverse power - Off, 75%, 50%, 25%.
- Direction conversion delay time - 0.25s, 0.5s, 0.75s, 1s, 1.5s, 2s, 3s, 5s.
- Throttle curve - logarithmic, linear, exponential.
- Direction of rotation - left, right.
- TIMING MONTITOR - On, Off
380A 22s BLDC motor controller suitable for brushless DC motors such as BLDC motor KV50 15kwatt.