Characteristics: DLE170 petrol engine 170CC

• Performance: 17.5 hp/7500 rpm.
• Idling speed: 1100 rpm.
• Static thrust: 35 kg/100 meters of height.
• Static thrust: 31.5 kg/altitude 1800 meters.
• Recommended propeller: 30x12; 32x10;
• Spark plug type: NGK CM6
• Volume: 170cm3
• Diameter × Stroke: 52mm × 40mm
• Compression ratio: 9.5:1
• Lubricant ratio: 30:1
• Main engine weight: 3620 g.
• Exhaust system weight: 470 g.
• Ignition weight: 190g.
• Ignition voltage: 4.8-8.4V
• Size: 212mm x 288mm x 174mm

• Brand: dsservo
• Model: DS3225 25kg
• Torque at supply voltage (5 V): 21 kg / cm
• Torque at supply voltage (6.8 V): 24.5 kg / cm
• Speed: 0.15 sec / 60 ° (V 5 V) / 0.13 sec / 60 ° (6.8 V)
• Operating voltage: 4.8 ~ 6.8 V DC
• Motor type: DC motor
• Gear type: copper and aluminum
• Operating frequency: 50-333 Hz

• Size: 40mm x 20mm x 41mm

• Manufacturer: Dsservo
• Servo model: DS5160
• Wire length: 320 mm
• Speed: 0.17 seconds / 60 degrees at (6 V) 0.15 seconds / 60 degrees at 7.4 V 0.13 seconds / 60 degrees at 8.4 V
• Torque: (58 kg when powered 6 V), (65kg when powered 7.4 V), (70kg when powered 8.4 V)
• Voltage: 6 - 8.4 V

• Size: 65mm x 30mm x 48mm

Specifications:

• Main controller: STM32H743
• Accelerometer/Gyroscope: ICM-20649
• Accelerometer/Gyroscope: ADIS16470
• Accelerometer/Gyroscope: BMI088
• Compass: RM3100
• Barometer: MS5611*2
• Receiver interfaces: S.BUS / PPM / DSM;
• Peripheral interfaces: PWM x14 (12 with DShot support)
• RSSI input: Analog / PWM
• UART ports for GPS: 2 (GPS and UART4)
• I2C buses: 4 (2 dedicated ports)
• CAN buses: 2
• ADC: 2
• USB port: Type-C
• Power lines: 2 (Power A is combined with the consumption sensor interface, Power C - with the CAN bus)
• Power: Power A / C - 4.3-5.4 V, USB: 4.75-5.25 V
• Voltage on the servo line: 0-36 V
• Dimensions: 77x45.5x39 mm (19.5 mm - expansion board only)
• Weight: 101 g
• Size: 77mm x 45mm x 39mm

Manufacturer: Hobbywing
• Maximum thrust: 19200 g
• Material: Polymer
• Size: 3011 "
• Diameter: 30 "
• Pitch: 11 "
• Propeller mount: T-Style; Hub

• Size: 360mm x 110mm x 15mm

Specifications:

• Manufacturer: HolyBro
• Number of cycles: 50/100/200
• Field measurement range: -800 to +800 μT
• Gain: 20 / 38 / 75 LSB/μT
• Sensitivity: 50/26/13 nT
• Noise: 30/20/15 nT
• Maximum sampling rate on one axis (divide by 3 to get maximum sampling rate on 3 axes): 1600/850/440 Hz
• Output connector: 4-pin JST-GH1.25
• Operating temperature: -40 to +85 °C

  Package:

  • HolyBro RM3100 electric compass - 1 pc.
  • Size: 34mm x 36mm x 13mm

• SPECIFICATIONS:
• Brand: DSSERVO
• Model: DS51150-12V
• Torque: 150 kg. cm at 10 V; 165 kg. cm at 12 V and 173 kg. cm at 12.6 V
• Speed: 0.24 C/60° at 10 V; 0.21 C/60° at 12 V and 0.19 C/60° at 12.6 V
• Operating voltage: 9 ~ 12,6 v
• Insensitivity zone: 3 μs
• Gearbox type: Stainless steel
• Working stroke: 180° (see next important note!)
• Number of teeth: 18T
• Wire length: 320 mm
• Size: 65mm x 30mm x 48mm

Technical characteristics

• Package: SMD
• Customizable: Yes
• Model Number: ZED-F9P-01B
• Operating temperature: 85
• Condition: New
• Type: Module
• Origin: Mainland China.
• Size: 52mm x 43mm x 3mm

Technical characteristics:

• MCU: STM32F4
• Protocol: DroneCAN
• Heater: resistive
• Air speed sensor: SM5391
• Measuring range: ±6895 Pa
• Range of air speed: 0-106 m/s
• Accuracy: ±1% FS
• Temperature measurement: -20℃~125℃
• Humidity measurement: 0-100%
• Heating element power: 35W
• Compatible controller: ArduPilot/PX4 (CUAV/Pixhawk)
• Operating voltage: 16V
• Operating temperature: -20℃ to 85℃
• Size: 102mm x 29mm x 28mm

Technical characteristics:

• MCU: STM32F4
• Protocol: DroneCAN
• Heater: resistive
• Air speed sensor: SM5391
• Measuring range: ±6895 Pa
• Range of air speed: 0-106 m/s
• Accuracy: ±1% FS
• Temperature measurement: -20℃~125℃
• Humidity measurement: 0-100%
• Heating element power: 35W
• Compatible controller: ArduPilot/PX4 (CUAV/Pixhawk)
• Operating voltage: 16V
• Operating temperature: -20℃ to 85℃
• Size: 102mm x 29mm x 28mm

• Brand: Dsservo
• Model: DS3115
• Maximum force: 15 kg
• Operating voltage: 4.8 ~ 6.8 V (DC)
• Motor type: DC motor
• Gear type: copper and aluminum
• Operating frequency: 50-333 Hz
• Angle 180 ° (PWM 500-2500 µs)

• Size: 40mm x 20mm x 41mm

Features:

• Voltage: 12-24 V (recommended battery capacity, can be adjusted if high voltage is required)
• Speed (no load): 24 V, about 0.46 s/60°.
• Maximum torque: 200 kg.cm.
• Nominal torque: 70 kg.cm
• Idle current: <0.15 A
• Flash current: 24 V: <11 A
• Input signal: PWM: 800–2200 µs, 50–400 Hz.
• Range of working angles: adjustable: minimum ± about 60 °, approximately up to ± 300 °.
• Application: industrial robot manipulator.
• Size: 132mm x 116mm x 55mm

Characteristics:

• Model - C2D-32X12-WTL
• Material - Carbon
• Size - 3212 "
• Diameter - 32 "
• Pitch - 12 "
• Number of blades - 2
• Folding blades - No
• Rotation direction - CCW
• Purpose - For slow flights; For multicopters; For electric motors

• Size: 812mm x 90mm x 45mm

Technical Specifications

• Working Voltage 8.4-16.8VDC
• Standby Current ≤200mA
• Locked Rotor Torque ≥90KG.CM@8.4V ≥130KG.CM@12.0V ≥150KG.CM@16.8V
• No-Load Speed ​​≤0.19sec/60°@8.4V ≤0.16sec/60°@12.0V ≤0.13sec/60°@16.8V
• Rotation Direction CCW (Counter-Clockwise), CW (Adjustable)
• Pulse Width Range 500-2500 μs
• Neutral position 1500 μs
• Tilt angle 180° ± 10°
• Maximum working angle 358° ± 10°
• Mechanical limit angle 360°
• Dead zone width ≤3 μs
• Operating temperature -20°C to 60°C
• Storage temperature -20°C to 60°C
• Weight 365 ± 0.5 g
• CNC housing material AL6061
• Gear material All-metal
• Reduction ratio 1: 257
• Motor type Brushless motor
• Size: 88mm x 33mm x 84mm

Propeller bore bases: 10mm, 12mm, 34mm.
• Maximum thrust: 3.25kg:
• 8mm Shaft diameter: 4mm
• Battery type: 6S Li-Po
• Complete set: Motor Tarot 4008 Martin
• 1 Metal base of folding propeller holder (44*10*2.5MM): 2.0g
• 1 Holder Carbon Base 15 X2.0MM): 0.85g
• 1 Button head screws: M3x4mm 0.4g*2
• Partially threaded cap screws for blades: M3x11.3mm 0.6g*2
• Pan head screws: M3x8mm 0.4g*3
• Cylinder head screws: M3x5mm 0.4g*4
• Teflon washer 8x3x0
• Attention! do not use the mounting bolts, they can damage the motor winding, which will disable it.

• Size: 44mm x 19mm x 19mm

Specifications

• Manufacturer: DLE
• Model: 60
• Part number: DLE 60
• Power: 7 hp/8500 rpm
• Idle speed: 1400 rpm/min
• Static drag: 5.2 kg/100 meters height
• Recommended propeller: 22x10; 23x8;
• Spark plug type: NGKKM6
• Bore × Stroke: 36mm×30mm
• Compression ratio: 7.6:1
• Ignition voltage: 4.8 V-8.4 V
• Size: 175mm x 276mm x 132mm

Technical specifications:

• EMAX ES3054 digital servo
• Trademark EMAKS
• Product name ES3054
• Operating voltage 4.8V-6.0V
• STD Direction counterclockwise/pulse travel 1500 to 1900 µs
• Torque 4.8V 3kg. see Max.
• 4.8V operating speed 0.15 sec/60° no load
• Stopping torque 6.0V 3.5kgcm Max.
• Operating speed 6.0V 0.13s/60° no load
• Fork available by FUT; JR
• Flower head 23T
• Maximum travel 145°±10° (700-2300 µs)
• Other bearing; Metal; Digital

• Size: 28mm x 13mm x 31mm

• Interchange protocol: I2C
• Sensor: MS4525D
• Voltage voltage: 2.7-5.5V
• Security stream: 12 mA
• Speed sensor development: 14 bits.
• Temperature compensation:
• Packaging
• Sensor - 1 pc.
• Pito tube (plastic sleeve) - 1 pc.
• Return hose - 1 pc.
• 4x life I2C bus cable

• Size: 20mm x 20mm x 4mm

Complete set:

• Specification:
• Package size: 300mm x 200mm x 60mm
• 5.8G Sensitivity: -93 dB
• Suitable antenna: SMA interface

• Size: 300mm x 200mm x 60mm

• Specification:
• Package size: 300mm x 200mm x 60mm
• 5.8G Sensitivity: -93 dB
• Suitable antenna: SMA interface

• Size: 300mm x 200mm x 60mm

Holybro M10 GPS

• Brand: Dsservo
• Model: DS3218
• Maximum force: 20 kg
• Operating voltage: 4.8 ~ 6.8 V (DC)
• Motor type: DC motor
• Gear type: copper and aluminum
• Operating frequency: 50-333 Hz
• Angle 180 ° (PWM 500-2500 µs)

• Size: 40mm x 20mm x 41mm

Main characteristics CUAV SKYE AIRSPEED SENSOR

• Product Origin: Guangdong, China
• Name: CUAV
• Models: CUAV-SKYE
• Personal template: No
• Processor: STM32F4
• Protocol: Dronekan
• Airspeed sensor: MS5525
• DC in: Default 12-36V
• Operating temperature: -20℃ 75℃
• Protection level: IP44 (installed on request)
• Size: 82mm x 30mm x 28mm

Product details: DLE 220CC DLE222 4-cylinder petrol engine

• Perfomance: 21.5hp/7500rpm
• Idling speed: 1000rpm/min
• Propeller: 32*10 /32*12 /34*10
• Sparking Plug: NGK CM6
• Exhaust gas quantity: 222.5 cm3
• Diameter X Stroke: 45mm x 35mm
• Compression ratio: 7.6X1
• Lubricant ratio: 30x1
• Net weight: 4950g
• Gross weight; 5610G
• Size: 286mm x 257mm x 176mm

Product details: DLE 220CC DLE222 4-cylinder petrol engine

• Perfomance: 21.5hp/7500rpm
• Idling speed: 1000rpm/min
• Propeller: 32*10 /32*12 /34*10
• Sparking Plug: NGK CM6
• Exhaust gas quantity: 222.5 cm3
• Diameter X Stroke: 45mm x 35mm
• Compression ratio: 7.6X1
• Lubricant ratio: 30x1
• Net weight: 4950g
• Gross weight; 5610G
• Size: 286mm x 257mm x 176mm

• Supply voltage 4...9 V
• Current consumption 13 mA
• UART interface
• Interface for compass QMC5883L I2C (DA,CL)
• Operating temperature range -20...+80 °C
• Dimensions 20x20x12.4 mm
• Weight 8g

• Size: 20mm x 20mm x 12mm

Technical parameters:

• Rated voltage: DC 24V (can work 12-24V, 12V torque and speed is halved)
• No-load current: <500mA (load current 5-10A, it is recommended to use 10A switching power supply or battery or more than 10A, the larger the output power of the power supply, the better. Battery is not included)
• Limit angle: 1200US-1700US: about 90 degrees. 500US-2500US: about 288 degrees (pulse width determines the angle, if you need other angles, increase or decrease the pulse width by yourself, maximum about 288 degrees)
• Control method: PWM pulse width modulation signal, frequency 50 Hz, period 20 ms. Signal voltage: 3.3V-5V. (Pulse frequency: 50-333Hz)
• Material: Gear and shaft: alloy steel, hardened steel, aluminum alloy; body: aluminum alloy
• Speed: 0.5 s/60° (equivalent to 20 rpm)
• Mechanical life:>300,000 times (370 hours)/(30kg/cm)
• Limiting torque: 400 kg/cm (tooth chipping load, it is not recommended to work at this torque)
• Starting torque: 380 kg/cm (short-term operation)
• Normal torque: 140kg/cm (can work for a long time)
• Size: 132mm x 124mm x 55mm

Specifications:

• Type: ball head
• Intended use: for aircraft models
• Material: aluminum
• Thread: M3
• Thread pitch: 0.5 mm
• Hole in the ball support: 3 mm
• Length: 26 mm
• Width: 6 mm
• Quantity in the set: 1 piece
• Size: 26mm x 6mm x 6mm

• Material: CNC machined aluminum
• Overall length: 35 mm
• The package includes:
• 25T steering system*1
• Screws*2

• Size: 35mm x 15mm x 6mm

• Specifications:
• Type: Flight controller with stabilization system
• Application: Car models; Helicopters; Multicopters; Airplanes
• The main microcontroller: STM32H753
• Sensors:
• Accelerometers and gyroscopes: ISM20649 (6DOF 32KHz); ISM20602 (6DOF 32KHz); ISM20948 (6DOF 32KHz)
• Compass: External
• Barometer: MS5611
• Number of PWM outputs: 14
• Peripheral interfaces: ADC; CAN; DigitalLED; I2C; S.BUS; SPI; SWD; SmartAudio; UART
• Receiver interfaces: DSM; PPM; S.BUS
• Supported protocols: DShot1200; Dshot150; Dshot300; Dshot600; Multishot; OneShot125; Oneshot42; PWM; PWM (collector. Motors); Proshot1000
• Interface ports:
• UART: 6
• I2C: 2
• SPI: 2
• CAN: 2
• OSD: External
• USB port: Є
• Debugging interface: SWD; USB
• Input voltage: 4 to 5.7 B
• External data storage: MicroSD memory card
• Flight functions: Return to home, Flight by points, POI mode, Hold at a point, Hold altitude
• Compass flight: Yes
• Dimensions: 94.5x44.3x17.3 mm (interface board)
• Dimensions: 38.4x38.4x22 mm (CUBE PC)
• Size: 80mm x 35mm x 10mm

Characteristics:

• Elements: 9 pcs. 18650 Samsung 35E 3500mah - original
• Assembly type: 3S3P
• Rectangular assembly shape
• Assembly nominal capacity - 9000mah
• Nominal voltage: 11.1 V
• Full charge voltage: 12.6 V
• Maximum continuous discharge current - up to 10 A
• Nickel-plated steel tape 0.15x5mm
• Reliable and neat connection - at least 6 welding points for each contact
• Size: 450mm x 150mm x 95mm

• Features:
• Brand: DSSERVO
• Product: RDS5180 digital servo drive
• Type: 180 °
• Operating Voltage: 6.0-8.4 DC Volts
• Rack Current: 3.5A/5A/6.2A (6.0V/7.4V/8.4V)
• Torque: 58 lbs. Sm (6.0 V), 65kg. Cm (7.4 V), 70kg. Cm (8.4 V)
• Speed: 0.17 sec/60 ° (6.0 V), 0.15 sec/60 ° (7.4 V), 0.13 sec/60 ° (8.4 V)
• Pulse: 500-2500us
• Frequency: 50-333Hz
• Dead band: 3us
• Neutrol position: 1500us
• Control: PWM
• Rotation: 180 °/ 270 °
• Gear: Metal gear
• Teeth: 25T
• Wire: 300mm
• Application: For RC Robot Arm DIY

• Size: 60mm x 30mm x 48mm

Technical characteristics

• KV: 690KV
• Base plating: Al 7075
• Stator: 0.2mm silicon steel Kawasaki
• Configuration: 12N14P
• Different shaft of support support adapter: M5
• Shaft: Titanium alloy hollow shaft
• Cell Number (Lipo): 8S-12S
• Bolt type: M3 (19X19 mm)
• Bearings: NMB 12*6*4 mm
• Rotor: N48SH arc magnets
• Wire AWG: 16# 300mm
• Cap: Al 7075
• Size: 38mm x 38mm x 53mm

Characteristics

• Manufacturer: Hobbywing
• Material: Polymer + Carbon
• Size: 4314 "
• Diameter: 43 "
• Pitch: 14 "
• Propeller mount: T-Style | Hub
• Number of blades: 2
• Folding blades: Yes
• Direction of rotation: CW and CCW
• Purpose: For multicopters | For electric motors | Folding blades
• Weight: 404 g
• Package: Propeller assembly with hub - 2 pcs (CW and CCW)

• Size: 500mm x 70mm x 15mm

Technical characteristics

• Model Number: OCS-D1102
• Radio Control Parts and Accessories: Servos
• Material: Metal
• Trade name: OCSERVO
• Origin: Mainland China.
• Usage: Remote control vehicles and toys
• Size: 45mm x 40mm x 10mm

SPECIFICATIONS

• Voltage: 5-27V
• Video interface: BNC or pin (1.25, 2.54 optional or customized according to requirements)
• Video input/output impedance: 75Ω
• Video bandwidth: 8MHz
• Video format compatibility: PAL, NTSC, SECAM
• Video voltage: 1V P-P
• Video signal to noise ratio: ≥70dB
• Applicable cameras: analog cameras and CVBS cameras
• Baud rate: 115.2Kbps (baud rate can be customized upon request)
• Fiber optic interface: FC/UPC
• Optical fiber wavelength: 1310nm/1550nm
• Transmission distance: 0-20km

• Size: 40mm x 45mm x 5mm

Technical specifications Hobbywing XRotor X9 110KV 12-14S engine with regulator and 3411 CW propeller (X9-110-CW)

Characteristics:

• Specifications
• Video output: Ethernet (RJ45)
• Control input: S.Bus/PPM/UART/UDP
• Operating voltage: 11 - 25.2 V
• Power consumption: 5 W
• Angle vibration range: +/- 0.01°
• Operating temperature: -10°c ~ +50°c
• Protection degree: IP53
• Magnification: 10x (optical), 3x (digital)
• Focal length: 5,15 ~ 47,38mm +/-5%
• Focus: 0.2m ~ ∞
• Viewing Angle: 79.5° Diagonal, 71.5° Horizontal
• Sensor: 1/2.7", 4 MP
• Recording Resolution: 2560x1440 30 fps
• Video format: MP (original recording in H.265 format, converted to MP4 when reloaded)
• Video bitrate: 12MBit/s
• Filesystem: FAT32
• White balance: Auto
• Photo capture: JPEG (single frames)
• Supported cards: MicroSD up to 32GB (up to 128GB if firmware upgrade)

• Size: 121mm x 101mm x 78mm

CubePilot HEX Here 4 Specifications:

Specifications

• Specification:
• Product name: 5000mAh 6S1P 22.2V
• Discharge rate: 50C/100C
• Voltage: 22.2 V
• Connectors: XT60/XT90/EC5/TRX/XT150

• Size: 139mm x 44mm x 56mm

Specifications:

Servo Drive

Technical characteristics

• KV: 500KV
• Base plating: Al 7075
• Stator: 0.2mm silicon steel Kawasaki
• Configuration: 12N14P
• Different shaft of support support adapter: M5
• Shaft: Titanium alloy hollow shaft
• Cell Count (Lipo): 8S/12S
• Bolt type: M3 (19X19 mm)
• Bearings: Japanese NMB 11x5x5mm
• Rotor: N52H arc magnets
• AWG wire: 16AWG 30cm long
• Cap: Al 7075
• Size: 36mm x 36mm x 52mm

DLE170G28

Electronic ignition for DLE170G28 engines

Technical specifications:

Characteristics for FPV goggles Skyzone SKY040 Pro 5.8GHz 48CH L,X Band Black

DISPLAY
• Display features: Two 3.4" diagonal displays
• Update frequency: 90 Hz
• Field of vision: Maximum 110 degrees INSHE
• Color: Black
• Vyrobnik: Skyzone
• Type: FPV Videosholom INTERFACE
• USB 3.0: 1
• DisplayPort v1.2: 1 FUNCTIONS
• Sensors: Gyroscope, Accelerometer, IPD sensor for adjusting the inter-institutional area
• Data entry: Microphone input, Button on the headphone
• Size: 185mm x 75mm x 68mm

Specifications

• Voltage: 24 V (recommended battery power, can be adjusted if higher voltage is required)
• Speed ​​(no load): 24 V approx. 0.75 sec/60°
• Maximum torque: 400 kg.cm
• Rated torque: 140 kg.cm
• No-load current: <0.15 A
• Stall current: 24 V: <14 A
• Input signal: PWM: 800–2200 μs, 50–400 Hz
• Operating angle range: adjustable: minimum ±30°, maximum ±150°
• Weight: 765 g
• Application: Industrial robot manipulator.
• Dimensions: 132 x 55 x 116 mm
• Size: 132mm x 116mm x 55mm

Specifications:

• Elements: 6 pcs. 18650 Samsung 35E 3500mah - original
• Assembly type: 2S3P
• Rectangular assembly shape
• Assembly nominal capacity - 6000mah
• Nominal voltage: 11.1 V
• Full charge voltage: 12.6 V
• Maximum continuous discharge current - up to 10 A
• Nickel-plated steel tape 0.15x5mm
• Reliable and neat connection - at least 6 welding points for each contact
• Size: 60mm x 4mm x 60mm

• RunCam brand
• Micro SD flash memory type color black
• Feature day and night camera
• Video camera type Action camera
• Lens type Zoom
• Product weight 10 grams
• Are batteries included No
• Shooting modes night
  • Size: 19mm x 19mm x 25mm

Product information HiModel 20A SBEC

• Model: HiModel 20A SBEC
• Input: 6 - 50.4 V
• Output voltage: 5V/5.5V/6V/7V/9V (jumper)
• Current: 20 A continuous / 25 A peak (2 seconds)
• Mode: Mode switch
• Quiet current: 60uA 200uA
• Size: 45mm x 26mm x 8mm

Technical specifications of the servo extension cable

• Cable length: 20 cm
• Pitch: 2.54 mm
• Number of handles: 3
• Cable type: for servo
• Socket - Plug
• Size: 20mm x 2mm x 2mm