Technical characteristics:

• MCU: STM32F4
• Protocol: DroneCAN
• Heater: resistive
• Air speed sensor: SM5391
• Measuring range: ±6895 Pa
• Range of air speed: 0-106 m/s
• Accuracy: ±1% FS
• Temperature measurement: -20℃~125℃
• Humidity measurement: 0-100%
• Heating element power: 35W
• Compatible controller: ArduPilot/PX4 (CUAV/Pixhawk)
• Operating voltage: 16V
• Operating temperature: -20℃ to 85℃
• Size: 102mm x 29mm x 28mm

Specifications:

• Manufacturer: HolyBro
• Number of cycles: 50/100/200
• Field measurement range: -800 to +800 μT
• Gain: 20 / 38 / 75 LSB/μT
• Sensitivity: 50/26/13 nT
• Noise: 30/20/15 nT
• Maximum sampling rate on one axis (divide by 3 to get maximum sampling rate on 3 axes): 1600/850/440 Hz
• Output connector: 4-pin JST-GH1.25
• Operating temperature: -40 to +85 °C

  Package:

  • HolyBro RM3100 electric compass - 1 pc.
  • Size: 34mm x 36mm x 13mm

Technical characteristics

• Package: SMD
• Customizable: Yes
• Model Number: ZED-F9P-01B
• Operating temperature: 85
• Condition: New
• Type: Module
• Origin: Mainland China.
• Size: 52mm x 43mm x 3mm

• Supply voltage 4...9 V
• Current consumption 13 mA
• UART interface
• Interface for compass QMC5883L I2C (DA,CL)
• Operating temperature range -20...+80 °C
• Dimensions 20x20x12.4 mm
• Weight 8g

• Size: 20mm x 20mm x 12mm

• Interchange protocol: I2C
• Sensor: MS4525D
• Voltage voltage: 2.7-5.5V
• Security stream: 12 mA
• Speed sensor development: 14 bits.
• Temperature compensation:
• Packaging
• Sensor - 1 pc.
• Pito tube (plastic sleeve) - 1 pc.
• Return hose - 1 pc.
• 4x life I2C bus cable

• Size: 20mm x 20mm x 4mm

Holybro M10 GPS

CubePilot HEX Here 4 Specifications:

Main characteristics CUAV SKYE AIRSPEED SENSOR

• Product Origin: Guangdong, China
• Name: CUAV
• Models: CUAV-SKYE
• Personal template: No
• Processor: STM32F4
• Protocol: Dronekan
• Airspeed sensor: MS5525
• DC in: Default 12-36V
• Operating temperature: -20℃ 75℃
• Protection level: IP44 (installed on request)
• Size: 82mm x 30mm x 28mm

Nanoradar NRA24 2.4GHz 200m UART Altitude Measurement Radar

Technical Specifications:

Product information HiModel 20A SBEC

• Model: HiModel 20A SBEC
• Input: 6 - 50.4 V
• Output voltage: 5V/5.5V/6V/7V/9V (jumper)
• Current: 20 A continuous / 25 A peak (2 seconds)
• Mode: Mode switch
• Quiet current: 60uA 200uA
• Size: 45mm x 26mm x 8mm

Technical specifications:

• Module circuit board current: 120 A
• Module power: 7-42 Vdc current (2S-10S)
• Module output power: 5.1-5.3VDC
• Module description:
• This PDB has a 5V output, 3A output.
• Integrated voltage and current sensor for flight controller
• Maximum input voltage UBEC: 7 ~ 42V (10S LiPo)
• PCB maximum continuous current: 120 A
• Pin card:
• Module specifications:
• UBEC current: 3A Max.
• Output power: DC 5.1V ~ 5.3V
• Mounting hole: 30.5mm*30.5mm

• Size: 35mm x 35mm x 5mm

ZED-F9T-10B-00 high-precision receiver board

Specification

• Chip: U-BLOX M8030-KT;
• Compass IC: HMC5883L;
• Number of channels: 72;
• Supported standards: GPS, GLONASS, Galileo, BeiDou, QZSS, SBUS;
• Interface:
• UART (GPS);
• I2C (compass).
• Consumption in active mode: 50mA (5V);
• Power supply voltage: 3V-5.5V;

• Size: 28mm x 28mm x 10mm

Specifications:

• Features:
• Product name: APM power module
• Maximum input voltage: 20V
• Max Current Detection: 90A-
• Measuring voltage and current from 5V ADC
• Switch regulator outputs 5.3 V and 2.25A max
• Cable connects directly to APM DF13 6-pos \ 'PM \ 'from 2.5 jack

• Size: 142mm x 21mm x 10mm

• Characteristics
• Manufacturer: Hitano
• Resistance: 68 ohm
• Power: 0.25W
• Accuracy: ± 5%
• Type: Output
• HMC5883L built-in compass with 160Hz refresh rate
• GPS+BD+SBAS or GPS+GLONASS+SBAS support
• Receiver type: 72 channel u-blox M8 engine

• Size: 54mm x 54mm x 20mm

Specifications:
• Number of measured channels: 1-8
• Radio Control Style: RC Hobby
• Measurement accuracy: 0.01 V
• Cell voltage indication range: 0.5-4.5V
• Battery voltage indication range: 0.5-36V
• Alarm threshold: 2.7-3.8V (in each cell)
• Measured voltage range: 3,7-30V
• Low voltage mode for alarm: 2-8C.
• en Trigger Threshold: 2.7-3.8V
• Material: Plastic
• Application: vehicles (remote control helicopters, airplanes)

• Size: 39mm x 24mm x 9mm

Features:

• card model: GY-GPS6MV2;
• GPS Module: u-blox NEO-6M-0-001;
• battery for fast, cold start;
• type LED indicators;
• Sensitivity: -147 dBm;
• update rate: 5 Hz;
• Interfaces: UART (withdrawn), SPI, DDC, IIC;
• transmit the coordinates in the format: NMEA;
• the default connection speed for UART: 9600;
• have an active antenna;
• Power supply: 3 - 5;
• the ability to work with the programs: U-Center, etc.;
• board size (L x W): 30 x 23 mm;
• antenna dimensions (L x W): 25 x 25 mm;

• Size: 30mm x 25mm x 15mm

ZED-X20P-00B-00 Differential GPS RTK Navigation Module

Description: Power Module 30V 90A for a radio-controlled model
• Input voltage: 6-30 V (2 ~ 8 s)
• Output voltage: 5.3 V ± 0.1 V
• Maximum output current: 3A
• Maximum current: 90A
• Maximum voltage: 30 V
• 6P cable can be directly connected to the flight controller APM / Pixhawk
• Additional 4 PIN to connect to another flight controller

• Size: 25mm x 21mm x 9mm

• Ublox OP GPS Module for CC3D
• Wire Length: 120mm

• Size: 26mm x 21mm x 10mm

Specifications:

• Size: 26mm*21mm
• Weight:: 8g
• Wire length: 15cm
• OP GPS is suitable for CC3D series (CC3D Original plug)
• NZ GPS is suitable for NAZE32 series (2.54 mm plug)

Connection diagram:

• Black - GND
• Red - +5V
• Blue - TX
• Orange - RX