• output: 0 ~ 5
• the input voltage of the sensor power supply: DC24V / DC12V
• Response time: more than 1 c
• Transmission distance: less 1 km
• measuring range: 0 ~ 50 m / s
• the measurement accuracy of + - 3%
• Initial wind speed: more than 0.6 M /
• Environmental temperature: -35 ~ 85 ° C
• DataSheet

• Size: 155mm x 155mm x 125mm

• voltage up 60 volts
• current consumption <10ma
• Current measuring range 0-100 A
• voltage measurement range of 0-70 in
• error in the middle of the range of about 1%
• edges accuracy range of about 3%
• Operating temperature range -10.. +50 ° C
• Input current - constant positive polarity
• Input voltage - constant, pulse (positive polarity)

• Size: 156mm x 70mm x 38mm

• Technical parameters:
• Supply Voltage: DC9-24V
• Output signal modes: Output 0-5V
• Sensor type: Floodlight
• Initial wind speed: 0.5 m / s
• Resolution: 0.1 m / s
• Measuring range: 0-360 degrees
• System error: 3%
• Transmission distance: more than 1000m
• Operating temperature: -20 ºC ~ 80 ºC

• Size: 230mm x 64mm x 188mm

• Current consumption <10 mA
• Input voltage - 3 ... 30V
• Readability - 0.01 V
• error - 0.01 V
• Operating temperature range -10 .. +50 ° C
• Form input voltage - constant, pulse (positive polarity)

• Size: 45mm x 30mm x 20mm

• output: RS 485
• the input voltage of the sensor power supply: DC24V / DC12V
• Response time: <1 c
• Transmission distance:> 1 km
• measuring range: 0 ~ 50 m / s
• the measurement accuracy of + - 3%
• Initial wind speed: <0.6 M /
• Environmental temperature: -35 ~ 85 ° C
• DataSheet

• Size: 150mm x 150mm x 125mm

• Type: battery tester (power meter, electric bicycle, electric scooter)
• Model: TK15
• Operating voltage range: DC8-80V
• Current: 50A
• Display size: 32x23 mm
• Working Power Consumption: 8mA
• Standby power consumption: 0.5 ma
• Voltage measurement accuracy: +/- 1.0%
• Current measurement accuracy: +/- 1.0%
• Battery Capacity Setting Range: 0.-590Ah
• External shunt, operating current: 30.0A (max: 50A)
• External large shunt, operating current: 50.0a (max: 100A)

• Size: 66mm x 40mm x 10mm

• The range of energy measurement: 0-3680 W
• Phase: single phase
• Output voltage: 230 V AC
• The voltage range: 190-276 B
• The maximum operating current of 16 A
• Minimum current: 0.005 A
• Display Type: LCD
• The frequency of the screen: 50 Hz

• Size: 135mm x 65mm x 45mm

Features:

   
• Current measurement: 0 ~ 10A DC     
• Voltage measurement: 0 ~ 100V DC     
• Accuracy Voltage: 0.1V     
• Current accuracy: 0,01A     
• Power supply: 6-35V     
• Current: <20mA     
• Accuracy: 1%      
• Professional LCD Screen     
• Working temperature: -10-65      
• The relative humidity - less than 80%     
• Screen Size: 0.28 inches     
• Size: 48 x 29 x 21 mm

• Size: 48mm x 29mm x 21mm

• Working voltage: 80 ~ 260vac
• Rated power: 100A / 4500W
• Operating frequency: 45-65Hz
• Large LCD screen
• Measuring range:
  • Power: from 0 ~ 4.5kW
  • Energy: from 0 ~ 9999 kWh
  • Voltage: 80 ~ 260 V
  • Current: 0 to 100 A   
  • Size: 90mm x 50mm x 25mm

• Operating voltage: 6.5 - 100VDC
• Rated power: 100A / 10000W
• Large-screen LCD display
• Measuring range:
  • Power: 0 to 10KW  
  • Energy: from 0 to 9999 kWh    
  • Voltage: 6.5-100 V DC     
  • Current: 0 to 100 A   

• Size: 88mm x 49mm x 24mm

• Measuring range: 0-150 mm
• Material: Stainless steel
• Accuracy: 0.02 mm
• LCD and 3 control buttons
• Automatic shutdown

• Size: 230mm x 80mm x 12mm

Voltmeter characteristics:

• Current consumption <10 mA
• Input voltage - 3 ... 30V
• Readability - 0.01 V
• error - 0.01 V
• Operating temperature range -10 .. +50 ° C
• Form input voltage - DC, constant, pulse (positive polarity)

• Size: 14mm x 32mm x 8mm

Features Clamp Meter UT203
• The manufacturer UNI-T
• Type pliers clamp
• The DC voltage 400mV, 4V, 40V, 400V, 600V ± (0.8% + 1)
• An alternating voltage 4V, 40V, 400V, 600V ± (1% + 5)
• Continuous current 40A, 400A ± (2% + 3)
• AC 40A, 400A ± (2.5% + 5)
• Resistance 400Om, 4kOm, 40kOm, 400kOm, 4MOm, 40MOm ± (1% + 2)
• The rest of the measurement diode test, continuity test, frequency (10 Hz-1 MHz) ± (0.1% + 3)
• Components clamp meter, probe, carrying case, user manual
• datasheet

• Size: 210mm x 77mm x 27mm

Characteristics of the time relay:

• Color: white
• Operating voltage: 230V 50 Hz
• Maximum current: 16A
• Load power, W: 3680W
• Accuracy: ± 1 min.
• Power Timer: built-in battery (Nimh 1.2V, more than 100 hours)
• Optional: time display
• Operating temperature: -10 ° C to + 40 ° C

• Size: 127mm x 57mm x 75mm

Characteristics of the time relay:

• Color: white
• Operating voltage: 230V 50 Hz
• Maximum current: 16A
• Load power, W: 3680W
• Accuracy: ± 1 min.
• Power Timer: built-in battery (Nimh 1.2V, more than 100 hours)
• Optional: time display
• Operating temperature: -10 ° C to + 40 ° C

• Size: 127mm x 57mm x 75mm

• Temperature range: -50 ~ 110 ° c
• Display Resolution: 0.1
• Temperature measurement accuracy: ± 1 ° 1 ° c
• Power: two LR44 battery-power buttons
• The length of the probe line: 1 m molded probe body
• Color: black
• Size: 47 * 28 * 14mm
• Weight: 22 g

• Size: 47mm x 28mm x 14mm

Features:

• Power consumption: DC 12V
• Temperature measuring range: -50 ° C ~ 110 ° C
• Temperature measurement accuracy:     
      
  • in the range of -9,9 ° C to 99,9 ° C: 0,1 °;     
  • other temperature ranges -50 ° C ~ 110 ° C: 1 ° C     
• The accuracy of hysteresis: 0,1 ° C
• Measuring input: NTC
• Waterproof sensor with 0.5 m cable
• Refresh Rate: 0.5s
• Current consumption: 35mA - 65mA
• Relay output: 1 pole 150V
• Display type: seven-segment LED-display

• Size: 48mm x 40mm x 18mm

• Manufacturer: UNI-T
• Model: UT353
• Application: measurement of ambient sounds
• Noise (by weight): 30 - 130 dB (height) of 0.1 dB (resolution), 1.5dB (precision)
• Current consumption: 40 mA or less (operating) 10 mA or less (power off)
• frequency sampling: short press FAST / SLOW - choose between fast sampling (125 ms) or a slow poll (1c)
• overload indication 100% rh / ol (maximum moisture content of the display is 100% rh; if the temperature below 20 ° c or higher than 60 ° c, «ol» is output.)
• measurement max / min: short press to toggle between MAX / MIN / normal measurements
• Data Hold: HOLD / BL: short press to enter the mode data, press and hold to turn on / off the backlight
• Units. MOD: ° c / ° F (shown «° c / ° f»)
• Auto-off: 5 minutes (turn the power off automatically after 5 minutes without operation, the function can be disabled)
• Low battery indicator: 3.0 - 3.5
• Current consumption: 40 mA or less (operating) 10 mA or less (power off)
• Battery: 3 x aaa1.5V batteries (not included)
• Size: 150mm x 50mm x 28mm

Tester Features LCR-T4:

• Model: LCR-T4
• Material: PCB
• Diet: 6F22
• Display: 128 * 64 backlit
• Test the speed of 2 seconds to 1min
• application: automatic identification of the radioactive element and its parameters:
  • - Automatic detection of the type of semiconductor and pinouts
  • - Measure R, L, C
  • - Measurement of ESR capacitors
  • - Tester bipolar and field-effect transistors
  • Size: 72mm x 62mm x 10mm

Features:

• Accuracy: 0.1 g (0.005 oz.)
• Measurement range: 0.1 g - 3000 g
• Automatic alarm on low battery
• 6 different units
• LCD display with backlight: 5bit
• Power: 2 x AAA batteries (not included)
• Operating temperature: 10-30 C
• Size: 125mm x 100mm x 25mm

• Temperature range: -50 ~ 330 C (-58 ~ 626 F).
• Accuracy: ± 1. 5% or ± 1. 5C
• Resolution: ± 1% or ± 1C
• Response time: 500 ms, 95% response rate
• The spectral range (wavelength): 8 ~ 14 microns
• Red Laser Power: less than 0.5 MW
• the ratio of the distance / location (contact patch) (D: S): 12: 1
• Choose between ° C / ° F
• Operating Temperature: 0 ~ 40 ° C (32 ~ 104 ° F)
• Relative Humidity: 10 ~ 95%
• Storage Temperature: -20 ~ 60 ° C (-4 140 ° F)
• Power: 2 x AAA battery
• Battery Life: 12 hours (without the use of a laser), 5 hours (laser)

• Size: 140mm x 90mm x 40mm

Specifications of wood moisture meter MD-4G:

• Measuring principle: electrical resistance
• Electrodes: built-in, replaceable
• Humidity measurement range: 5% to 40%
• Precision: +/- 1%
• Resolution: +/- 1%
• Power: 1 * 9V (not included)
• Hold measurement function on the display
• Enclosure: shockproof plastic
• Operating temperature range: 0 to 40 * C
• Relative humidity: 0 to? 0% RH
  • Size: 126mm x 70mm x 29mm

Features:

• Current measurement: 0 ~ 100A (wine shunt)
• Voltage measurement: 0 ~ 100V DC
• Voltage accuracy: 0.1V
• Current measurement accuracy: 0.01A
• Supply voltage: 6-35V
• Current: <20mA
• Accuracy: 1%
• Professional LCD screen
• Operating temperature: -10-65
• Relative humidity - below 80%
• Screen size: 0.28 inches

• Size: 48mm x 29mm x 21mm

• Measurement principle: double integration
• Display: 15mm LCD
• The maximum value: 1999
• The measurement parameters of transistors: checking P-N junction, measuring HFE
• Overload Indication: display "1" on the display
• Low battery voltage indication: display - / + display
• The limits of measuring DC voltage: 200mV / 2V / 20V / 200V + - 0.5% to 600V + - 0.8%
• The limits of measuring AC voltage: 200V / 600V + - 1.2%
• dc measurement range: 200uA, 2mA, 20mA + - 1%, 200mA + - 1.5%, 10A + - 3%
• Range of resistance measurement: 200Om, 2KOM, 20KOm, 200KOm, 2 MW + - 0.8%
• Display Backlight: yes
• Power supply: 6F22 9V battery (installed)
• Operating temperature range: from 0 ° C to 40 ° C
• Storage Temperature: -10 ° C to 50 ° C
• Overload protection on all ranges of measurements
• Protective fuse: 200mA / 250V
• Siglal continuity: the sound and the display
• Fixing testimony: there
• Type of protection: CAT II600V
• Size: 138mm x 69mm x 31mm

• Measurement range Voltage: 3.5 - 7.0 in
• voltage measurement Resolution: mV
• The margin of error voltage measurement: ± 1%
• Current measurement range: 0 - 3 A
• current measurement resolution: mA
• The margin of error of current measurement ± 1%
• The voltage drop: 200mV
• Operating Temperature: 0 - 60 ° C
• Dimensions: 52 x 34 x 15 mm
• Weight: 17 g

• Size: 52mm x 34mm x 15mm

• Operating voltage: 3... 10
• Operating current: 1... 2 A
• Load at 5 V: 5 - 10 W
• LED indication of current value
• Size: 7.5 x 2.2 x 1 cm

• Size: 75mm x 22mm x 10mm

• Manufacturer: UNI-T
• Model: UT333
• Application: measurement of temperature and humidity
• Humidity: 0-99.0% RH0.1% rh ± 5% rh under normal temperature (23 ° C ± 5 ° c)
• temperature: -10-60 ° c / 14-140 ° F 0.1 ° c / 0.2 ° f ± 1.0 ° c / ± 2.0 ° f at normal humidity condition (40% rh-75% rh)
• The sampling rate: 1 / s
• overload indication 100% rh / ol (maximum moisture content of the display is 100% rh; if the temperature below 20 ° c or higher than 60 ° c, «ol» is output.)
• measurement max / min shows "max / min"
• Data Hold: hold
• Units. MOD: ° c / ° F (shown «° c / ° f»)
• backlight: bl
• Auto-off: 5 minutes (turn the power off automatically after 5 minutes without operation, the function can be disabled)
• Battery: 3 x aaa1.5V batteries (not included)
• Size: 155mm x 50mm x 28mm

Features Current clamps DT3266L
• Manufacturer: VKTECH
• Model: DT3266L
• Type pliers clamp
• Constant voltage 600V ± (1%)
• AC voltage 600V ± (1,2%)
• Measurement method: double integration;
• AC 600A ± (2.5%)
• Resistance 2MOm ± (1%)
• Display of low battery
• Display overflow
• Data Hold (hold)
• The maximum diameter of the electric wire 30mm
• Power 2 AAA batteries
• The rest of the measurements: continuity test circuit, diode test, the search phase conductor;
• Options: device with a clamp meter, test leads, user guide
• Size: 167mm x 55mm x 22mm