HappyModel ExpressLRS ELRS 2.4G RX SX1280 Long Range PP Nanorange Receiver

HappyModel ExpressLRS ELRS 2.4G RX SX1280

Binding procedure:

1. After connecting the receiver to the flight controller, power up the flight controller by connecting the USB. Insert for the first time

After USB, disconnect the USB once the LED indicator on the receiver goes out. repeat the operation once,

When the USB is connected for the third time, the LED will start flashing twice, which means the receiver is in pairing mode.

2. Correctly connect the ES24TX module or ELRS 2.4G DIY tuner module to the remote control

After that, copy the ELRS.LUA file to the SD card in the remote control, SD

Card/Scripts/tools directory, then run the ELRS.LUA for the Bind operation.

3. After successful binding, the LED indicator on the receiver will be on steadily, and you can also receive the telemetry signal.

4. Status value of the receiver LED:

PP receiver: always on, frequency pairing is successful or the pairing and communication are normal, LED indicator flashes twice in frequency pairing, slow flashing LED cannot receive the transmitter signal