GreenChip.com.ua
Models aircraft > Servos

High torque servo DDTS380 400kg/cm

High torque servo DDTS380 400kg/cm

Technical parameters:

  • Rated voltage: DC 24V (can work 12-24V, 12V torque and speed is halved)
  • No-load current: <500mA (load current 5-10A, it is recommended to use 10A switching power supply or battery or more than 10A, the larger the output power of the power supply, the better. Battery is not included)
  • Limit angle: 1200US-1700US: about 90 degrees. 500US-2500US: about 288 degrees (pulse width determines the angle, if you need other angles, increase or decrease the pulse width by yourself, maximum about 288 degrees)
  • Control method: PWM pulse width modulation signal, frequency 50 Hz, period 20 ms. Signal voltage: 3.3V-5V. (Pulse frequency: 50-333Hz)
  • Material: Gear and shaft: alloy steel, hardened steel, aluminum alloy; body: aluminum alloy
  • Speed: 0.5 s/60° (equivalent to 20 rpm)
  • Mechanical life:>300,000 times (370 hours)/(30kg/cm)
  • Limiting torque: 400 kg/cm (tooth chipping load, it is not recommended to work at this torque)
  • Starting torque: 380 kg/cm (short-term operation)
  • Normal torque: 140kg/cm (can work for a long time)
  • Size: 132mm x 124mm x 55mm
Count Price
From1шт7963грн
From2шт7804грн
From6шт7644грн
From16шт7565грн
From42шт7485грн
Code: 2016
шт.

Бесплатная доставка по Украине

Є в наявності
Переглянути відгуки (0)
With this product buy:

DDTS380 400kg/cm High Torque Servo Ideal precision industrial steering servo for remote controlled UAV

Product Features:

  • Applicable to servo controller, model airplane remote control.
  • High torque alloy motor
  • The aluminum alloy gearbox is very lightweight.
  • Easy to install, durable, reliable, stable and practical.

    Application range:

  • Large robots, power connections of mechanical arms.
  • Automation of industrial robots.
  • Precise valve angle control.
  • Large camera pan/tilt
  • Large remote control car model, remote control ship model

    DDTS380 400 кг/см Сервопривод с высоким крутящим моментом DDTS380 400 кг/см Сервопривод с высоким крутящим моментом1

    Attention:

  • Please test various application scenarios yourself and use them after passing the test. Please use large scale testing for various application scenarios yourself. We are not responsible for the consequences of this!

    The package includes:

  • - 1 x servo drive

    Note:

  • - The battery and other items shown in the photos are not included in the package and are for display purposes only. Thank you for your understanding!

    Connection diagram (when using a radio-controlled receiver):

  • The five lines are taken from the DDTS380 servo.
  • Three of the five wires: orange - signal, red - empty contact and brown - ground wire. Used to connect to control signal receiver or servo controller. It can be directly connected to FUTABA or JR receiver.
  • Also, you need to prepare a separate 24V power supply to control the servo. The red wire is the positive terminal and the black wire is the negative terminal. Please note that our servo can work with 12-24V voltage, but the lower the voltage, the slower the speed and less torque. The specified torque value and speed value correspond to the value of the 24V power supply.
  • If only power is supplied and there is no input signal, the servo will not move and will not produce torque!
  • If you only apply power and turn off the signal during use, the servo will not move and will not output torque!
  • When powering on, first connect the signal and then supply power to the servo. When turning off, please turn off the power first and then turn off the signal! This is normal operating procedure.

    DTS380 400 кг/см Сервопривод с высоким крутящим моментом комплект DTS380 400 кг/см Сервопривод с высоким крутящим моментом размери

    • Reviews of the High torque servo DDTS380 400kg/cm: