DC-DC 10A 300W Automatic Step-up Step-Down Converter 5V-30V to 1.25-30V

Specifications

Working frequency: 150KHz
Input voltage: DC 5V-30V
Output voltage: DC 1.25V-30V
Output power: 150W maximum 300W
Output current: recommended 5A maximum 10A
Conversion efficiency: comprehensive not less than 80%
Protection function: short circuit, overcurrent and overheating
Size: 76mm x 45mm x 43mm

Count			Price
From	1	шт	686	грн
From	2	шт	673	грн
From	8	шт	659	грн
From	22	шт	652	грн

Переглянути відгуки (0)

With this product buy:


12AWG Silicone flexible stranded cable	16AWG Silicone stranded flexible cable (black)	16AWG Silicone stranded flexible cable (red)	LTC3780 DC-DC 5-32V to 1V-30V 10A buck-boost converter	Voltmeter digital	XT60 connector "male / female"

Features:

1. Used in voltage stabilization occasions, as long as the input voltage range is within the voltage range of the voltage stabilization module, the output can be kept constant.

2. The solar panel voltage is stable. The solar panel voltage fluctuation is relatively large. This module can be used to power equipment or charge the battery.

3. The modular fast input and output allowable voltage range is relatively large, the output is relatively stable, it is widely used in many fields: constant voltage and constant current are adjustable, safe and reliable.

4. This step-up-step module uses a large radiator to ensure heat dissipation; four high-power tubes, three-wire and three-wire sendust inductance, not easy to saturate, and further reduce heat loss, thicker 1.6 circuit board, increase The input and output adopt high-frequency low-resistance capacitors to improve stability, which greatly reduces the output ripple.

Specification:

Name: Non-isolated DC Constant Voltage Synchronous Rectifier Module

Note:

1. There may be deviations in the size measurement, please refer to the actual product.

2. The output efficiency depends on the boost and step-down working methods and the pressure difference, please note.

3. Pay attention to monitoring the heat dissipation during operation to improve stability, and use auxiliary heat dissipation if necessary.

4. The output current is generally recommended to be used in 5A cases. If a larger output current is required, two modules can be used in parallel.

DC-DC 10A 300W Автоматический повышающий понижающий преобразователь 5V-30V в 1.25-30V

Reviews of the DC-DC 10A 300W Automatic Step-up Step-Down Converter 5V-30V to 1.25-30V: