Video and SBUS signal transmission module via FC optics TX UART/TTL/SBUS
SPECIFICATIONS
- Voltage: 5-27V
- Video interface: BNC or pin (1.25, 2.54 optional or customized according to requirements)
- Video input/output impedance: 75Ω
- Video bandwidth: 8MHz
- Video format compatibility: PAL, NTSC, SECAM
- Video voltage: 1V P-P
- Video signal to noise ratio: ≥70dB
- Applicable cameras: analog cameras and CVBS cameras
- Baud rate: 115.2Kbps (baud rate can be customized upon request)
- Fiber optic interface: FC/UPC
- Optical fiber wavelength: 1310nm/1550nm
- Transmission distance: 0-20km
- Size: 40mm x 45mm x 5mm
Переглянути відгуки (0)
DESCRIPTION The module for receiving/transmitting analog video and SBUS signals via FC optics TX/RX UART/TTL/SBUS the converter for fiber optic provides stable transmission of video and serial signals at a distance of up to 20km. The device is equipped with a FC/UPC fiber optic interface with a wavelength of 1310nm/1550nm and supports a data rate of 115.2 Kbit/s with the ability to configure. The video interface BNC or pin (1.25, 2.54) adapts to different system requirements. The video bandwidth of 8MHz and the signal-to-noise ratio ≥70dB ensure high image quality for analog and CVBS cameras. Compatibility with PAL, NTSC and SECAM formats allows you to work with different video standards. Additionally, UART, TTL and SBUS signal conversion is supported, making the device versatile for complex projects. RX module connects to the remote control and works to receive video; TX module is installed on the drone and transmits video.
FEATURES
