
Inverter IPOWER 48 - 220V 1500W pure sine
Features:
- Input voltage: 40-55 V DC
- Output voltage: 210 V-240 V AC
- Continuous output power: 1500 W
- The maximum output power (peak): 3000 W
- Output waveform: pure sine wave
- Frequency: 50 Hz ± 2 Hz
- Operating temperature range: -40... + 40 ° C
- Conversion Efficiency: at least 90%
- Switch the fan control
- Overload
- Reverse polarity protection
- Size: 320 * 150 * 70 mm
Переглянути відгуки (3)
Inverter IPOWER 48 - 220 V 1500 W pure sine converts the constant voltage of a 48 V battery into an alternating sinusoidal voltage of 220 V and a frequency of 50 Hz. Now you can freely use 220 V electrical appliances anywhere by connecting them to the battery via an inverter.
Inverter IPOWER 48 - 220 V 1500 W pure sine wave is a wide-range inverter. Pure sinusoidal voltage allows you to connect to the inverter any equipment designed to operate on alternating voltage 220V and a frequency of 50 Hz, namely:
- audio, video, household appliances;
- alternative energy sources;
- computers;
- power tools (drills, saws, hammer drills, etc.);
- heating boilers;
- telecommunication equipment;
- electric motors.
Allowed to work on all types of loads: active, inductive, capacitive.

Inverter IPOWER 48 - 220 V 1500 W pure sine has twice the maximum (peak) power. This allows you to effectively start electrical appliances with increased power. For example, starting up a refrigerator or air conditioner requires more energy than when it is running.
Inverter IPOWER 48 - 220 V 1500 W pure sine has built-in protection systems:
- Reverse polarity protection
- Short circuit protection
- Overload protection
If the power of the connected equipment exceeds the rated power of the inverter, then the overload protection will trip. The inverter will not fail, it will operate overload for a few seconds, then if the load does not enter the specified limits (no more than 1500 W), the inverter will shutdown, followed by periodic restart attempts. When the overload is removed, the inverter will automatically return to operating status.
- Overvoltage protection
If the supply voltage exceeds 55V, the inverter will shut down. As soon as the supply voltage is within the operating range, the inverter will automatically return to operating state.
- Thermal protection (overheating protection)
Protects the inverter from overheating when operating at full load or at elevated ambient temperatures. When the temperature inside the case reaches + 70 ° C, the inverter turns off, after cooling down - it automatically turns on.
- Protection of the battery against complete discharge (from undervoltage)
When the input voltage drops below 40 V, the inverter will automatically shut down, thereby protecting the battery from deep discharge.
- Power saving mode ("sleep" mode)
In case of no load, the inverter, with the toggle switch in the "sleep" position, will go into a reduced power mode (less than 30 mA). When a load of more than 8W is applied, the inverter will restore to working condition.
Inverter IPOWER 48 - 220 V 1500 W pure sine plays an important role in the construction of a photovoltaic system based on solar panels. Solar panels produce 12, 24, or 48 volts direct current, which charges the batteries. Batteries, in turn, also provide direct current with a voltage of 12, 24 or 48 volts. By connecting the inverter to these batteries, we get an alternating current with a voltage of 220V. And already all the necessary household appliances are connected directly to the inverter.
Inverter IPOWER 48 - 220 V 1500 W pure sine has a high efficiency (more than 90%).