Actuator HF 2436
Features:
- Rated operating voltage - 24V.
- 15,000 Newton effort
- Swing speed: 3 mm / sec.
- Have a reed position sensor, corrosion-resistant coating and are characterized by a low level of noise.
- Stem extension length is 36 inches (90cm)
- Size: 1200mm x 200mm x 200mm
| Count | Price | |||
|---|---|---|---|---|
| From | 1 | шт | 22540 | грн |
| From | 2 | шт | 22090 | грн |
Переглянути відгуки (2)
36-inch HF 2436 Actuator is a device that is mounted on a gimbal with a polar coordinate system to rotate the device to the required position.
Actuator HF 2436 is required to turn the satellite dish on command to the required satellite. Installed on a satellite dish suspension. To work, a positioner is required that acts as a control device and stores the positions of the satellites. Currently, actuators are used not only in the field of satellite television, but also in other areas, for example, a drive for turning solar panels, opening swing doors, gates, gates, lifting a motor boat engine, etc.
HF 2436 stem length is 36 inches with an oversized stem diameter. The length of the HF 2436 actuator can be adjusted by means of a horse shaft. Recommended for use with devices with a diameter of 2 m. The actuator is powered by 36 volts DC, has a four-contact pad - two power contacts and two contacts for the positioner. By changing the polarity of the supply, you can change the direction of movement of the stem.
You can use an actuator:
- in the satellite dish to turn to the satellite;
- in a solar power plant - turn the solar panel;
- to open windows;
- in the incubator - to move the egg tray.
- as a drive for opening swing doors
- as a drive for lifting a motor boat engine
