Inverter IPOWER 48 - 220V 1500W pure sine
- Input voltage: 40-55 V DC
- Output voltage: 210 V-240 V AC
- Continuous output power: 1500 W
- The maximum output power (peak): 3000 W
- Output waveform: pure sine wave
- Frequency: 50 Hz ± 2 Hz
- Operating temperature range: -40 ... + 40 ° C
- Conversion Efficiency: at least 90%
- Switch the fan control
- Reverse polarity protection
- Size: 320 * 150 * 70 mm
Переглянути відгуки (3)
Inverter IPOWER 48 - 220 1500 watt pure sine converts the DC battery voltage 48 V AC sinusoidal voltage of 220 V and 50 Hz. Now you can anywhere freely use electrical appliances in the 220 by connecting them via an inverter to the battery.
Inverter IPOWER 48 - 220 1500 watt pure sine - is the widespread use of the inverter. Pure sine wave inverter allows you to connect any equipment designed to operate on 220 VAC, 50 Hz, namely:
- Audio, video, home appliances;
- alternative energy sources;
- power tools (drills, saws, drills, etc.);
- telecommunications equipment;
is allowed to work on all types of loads: resistive, inductive, capacitive.
Inverter IPOWER 48 - 220 1500 watt pure sine has twice the maximum (peak) power. This allows an efficient run appliances having increased capacity. For example, during the startup phase of the refrigerator or the air conditioner requires a greater amount of energy than in the course of their work.
Inverter IPOWER 48 - 220 1500 watt pure sine has built-in protection system:
- Reverse polarity protection
- Short-circuit protection
- Overload protection
If the power of the connected equipment exceeds the rated capacity of the inverter, then work overload. The inverter does not fail, it will work overload for a few seconds, and then, if the load will not be included in the limit (not more than 1500 W), the inverter will trip with the subsequent periodicheksimi restart attempts. After the overload is removed avtomaticheksi inverter returns to working condition.
- overvoltage protection power
If the supply voltage exceeds 55 V, the inverter shuts down. As soon as the power supply will enter the normal operating range, the inverter will automatically return to the operating status.
- Thermal protection (protection against overheating)
Protects the inverter from overheating when operating at maximum load or at high ambient temperatures. When the temperature inside the enclosure 70 0C inverter turns off after cooling - automatically.
- Protects the battery from being fully discharged (by voltage reduction)
By reducing the input voltage drops below 40 V inverter will automatically shut down, thereby protecting the battery from deep discharge.
- Power saving mode ("sleep" mode)
In case of no load, the inverter when setting the dial to the "sleep", will enter a low-power (less than 30 mA). When you are loading more than 8 watt inverter will restore the operating status.
Inverter IPOWER 48 - 220 1500 watt pure sine plays an important role in the construction of photovoltaic systems based on solar panels. Solar panels produce direct current voltage of 12, 24 or 48 volts, which charges the batteries. Batteries, in turn, also give a direct current voltage of 12, 24 or 48 volts. When connecting the inverter to the data accumulators, we obtain an alternating current with a voltage of 220V. And directly connected to the inverter all the necessary appliances.
Inverter IPOWER 48 - 220 1500 watt pure sine has a high efficiency (over 90%).