Inverter IPOWER 12 - 220 V 600 W / 1200W pure sine
Features: Inverter IPOWER 12 - 220V 600 w
- Input voltage: 10-15 V DC
- Output voltage: 210 V-240 V AC
- Continuous output power up: 600 W
- The maximum output power (peak): 1200 W
- Output waveform: pure sine wave
- Frequency: 50 Hz ± 2 Hz
- Operating temperature range: -40 ... + 40 ° C
- The conversion efficiency of not less than 85%
- Switch the fan control
- Reverse polarity protection
- Protection from low input voltage
- Protection against high output voltage
- Size: 185 x 95 x 55 mm
Переглянути відгуки (0)
Inverter IPOWER 12 - 220V 600 W / 1200W pure sine is designed for AC sinusoidal voltage of 220 V, 50 Hz from the DC battery voltage of 12 V. Now you can anywhere freely use electrical appliances at 220, connecting them via an inverter to the battery. The source voltage is ± 12 V can be used the car battery, wind and solar generators.
The shape of the output voltage of the inverter - pure sine wave. This voltage is necessary for powering devices with sensitive electronics (heating boilers, medical equipment, measuring and laboratory devices, audio equipment), as well as all electrical appliances, which are integrated circuits, boards and chips.
Inverter IPOWER 12 - 220V 600 W / 1200W pure sine has built-in protection and galvanic isolation; fuses input. If the battery voltage ± 10.2-10.8 V and exceeding the peak power load beep. Automatic shut-off device occurs at low input and output voltage drop.
Cooling Inverter permanent and is carried out by means of the cooler mounted on the rear panel. There are also terminals for connecting the cable from the battery and 2 fuses. Inverter IPOWER 12 - 220V 600 W / 1200W pure sine has a reliable thermal protection, operate at a temperature> 45 ° C, protected against overload and short circuit.
Inverter IPOWER 12 - 220V 600 W / 1200W pure sine has a high efficiency (over 85%).