Smart BMS 16S 150A
- Specifications:
- Size: 180mm x 140mm x 15mm
Переглянути відгуки (0)
Smart BMS 16S 150A
Smart BMS 16S 150A (Battery Management System) is an electronic board that is installed on the battery to be able to monitor the charge/discharge process, status of the battery and its components, temperature, number of charge/discharge cycles, protection of a composite battery.
Smart BMS 16S 150A provides individual monitoring of the voltage and resistance of any battery cell, distributes currents between the battery components during charging, monitors discharge current, detects loss of capacity from unbalance, ensures reliable load connection/disconnection.
BMS 16S 150A performs battery balancing of cells based on the received data, protects battery from overcharging or overdischarge (high and too low cell voltage), short circuit, overcurrent, overcooling and overheating. Using Smart BMS 16S 150A, the battery operation mode improves significantly, and their service life is maximized.
When a dangerous battery condition is established, Smart BMS 16S 150A reacts accordingly and issues a ban on the use of battery in the electrical system, i.e. disables it.
Smart BMS 16S 150A protection board specifications:
| № | Name | Value | |
|---|---|---|---|
| 1 | Voltage | Charge Voltage: | DC: 67.2V CC/CV | Single cell balancing voltage: | 4.2V | 2 | Current | Single cell balancing current: | 50 mA | Maximum continuous charging current: | 150A | Maximum continuous discharging current: | 150A | 3 | Over-charge protection | Over-charge detection voltage: | 4.25V ≤ ±0.025V | Over-charge testing delay time: | 1 s | Over-charge release voltage: | 4.15V ≤ ±0.025V | 4 | Over-discharge protection | Over-discharge detection voltage: | 2.8V ≤ ±0.1V | Over-discharge delay time: | 144 ms | Over-discharge release voltage: | 2.9V ≤ ±0.1V | 5 | Over-current protection | Over-current testing voltage: | 0.15V | Over-current detection current: | 300A ≤ ±5A | Over-current delay time: | 200 ms | Release conditions: | Cut load, automatic recovery | 6 | Short circuit protection | Detection condition: | external short circuit | Detection delay time: | 200 ms | Release conditions: | Cut load, automatic recovery | 7 | Resistance | Protection circuitry (MOSFET): | 0.1 Ohm | 8 | Temperature | Over Temperature: | 75°C | Over Temperature release: | 55°C | Operating temperature range: | -20˚C ~ +75˚C | Storage temperature range: | -20˚C ~ +125°C | 9 | Size: | 180*140*15 mm |
