Darwin129 7" Long Range PNP Quadcopter

After many attempts and experiments, we have updated Darwin129.

For example, the GPS changes to M80, the search speed is faster and accuracy is higher, the rear buzzer and 8 high-brightness RGB lights make it easier to locate

The motor cable is replaced with a silicone cable with sufficient content and it does not melt during soldering.

Add a battery pad to effectively prevent the battery from slipping out.

The VTX antenna is specially designed for long-distance flights, so the transmission distance is much longer.

The flight controller supports bluetooth function and can be quickly connected to the mobile phone APP. Make the drone setup much more convenient.

The VTX transmission power is increased to 800mW, the transmission distance is longer.

The flight controller is equipped with silicone shock absorbers, which effectively reduce the vibration of the controller.

The camera has been updated to 1500TVL Darwin B19

Comes without battery, charger, receiver and remote control.

2507 Brushless motor 1800KV 3-5S

Brushless motor KV: 1800KV

No-load current (Io/10V): 0,89 A

Lipo Cell: 3-5S

Weight: 39g

Maximum continuous current: 42 A

Maximum continuous power: 840 W

Maximum thrust: 1488 g (4 S/7")

Configuration: 12 N/14 P

Motor resistance (RM): 0.0586 ohms

Stator diameter: 25 mm

Stator thickness: 7 mm

Motor diameter: 30.8 mm

Motor housing length: 20 mm

Total shaft length: 35 mm

Adapter driveshaft: M 5

Distance for bolts: 16 mm

Bolt thread: M 3

Propeller: 7"

4In1 50A Blheli_S ESC

Constant current: 50 A

Peak current: 60 A (10 C)

Lithium battery section number: 3-5 S

BEC: 5 V 2 A

ESC weight: 10,8 g

Firmware: BL_S

Maximum support for gas signal: DSHOT 600

Mounting hole: M3 30.5 * 30.5 mm

F4 flight controller

Lithium battery section number: 3-5 S

BEC: 10V 1A, 4.5V, 3.3V

IMU: MPU6500 (SPI)

MCU: STM32F405

On-screen menu: AT7456E

Firmware: MATEKF405

Weight: 7.2 g

Mounting hole: M3 30.5*30.5mm

Support for black box

Bluetooth

5.8G40CH 800MW VTX TX805

Item name: VTX FPV Transmitter

Frequency: 5.8G Channels: 40CH

Input voltage: 7V~24V

Camera power supply 5V: 120 mA (MAX.)---- 25 mW at 12V 5V

Camera power supply: 200mA(MAX)----200mW@12V 5V

camera power supply: 300mA(MAX)----600mW@12V 5V

camera power supply: 350mA(MAX)----800mW@12V optional

Features: Smart audio.

Power supply: 5V output for camera

Output power: 25wm/200wm/600wm/800wm

switchable antenna connector: MMCX

Cable connector: contact pads for soldering

Dimensions: 36 mm * 22 mm * 5 mm, 30.5 stacking holes

Weight: 8 g (without antenna)

Darwin M80 GPS

Name: GPS + GLONASS

Power supply: 5 v

Botelv: 115200 dps

Receiver sensitivity: Tracking -167 dBm Capture -160 dBm