Relay Module 2 Channel 5V for Arduino PIC ARM AVR
- Features:
- current control relay: 15 - 20 mA;
- control voltage relay 5V;
- komutiruyuschy current 10A
- LED indication of the status of each relay;
- a standard interface through which you can control relay module via controller Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic or computer;
- Dimensions: 49.3 x 38.2 x 20.0 mm;
- Weight: '30
Переглянути відгуки (0)
Relay Module 2 Channel 5V for Arduino PIC ARM AVR is used to control various devices with high input current.
In order to use relay module need to connect the device controlled. Then you need to connect the 5V power to the terminals Vcc and Gnd module. Then to the control wiring ln1 - ln2 relay module must be connected microcontroller, computer or other control device and get to work. To each of the 2 relays connected red LED that lights up when the relay is energized.
Modul relay 2 Channel 5V for Arduino PIC ARM AVR has two interfaces - for connecting the control unit (MCU computer) and managed to connect devices to the switch:
- to connect the relay module to the control device used 4-pin interface. Contact GND and VCC to connect + 5V, the conclusions ln1 - ln2 to connect the control signal;
- to connect to the relay controlled devices present on the board 6-pin-clips (3 on each relay).
Power relay module 2-channel 5V for Arduino PIC ARM AVR is carried out or on the control device or external power supply (power supplies, batteries).