• - Rated voltage: 24v
• -Rated power: 250w
• - Maximum power: 500w
• - Rated current: 13.7A
• - Maximum current: 21A (short-term)
• - Maximum shaft rotation speed (without load): 420 rpm.
• - Under load, the rotation speed will decrease by about 25-30%
• - Shaft rotation in both directions (when using a controller with a change in the direction of rotation of the shaft, or a PR-2 reverse switch)
• - Maximum efficiency 80%
• - Cooling air, passive (heat dissipation by the body)
• - Body material: steel, light alloys.
• - The gears in the gearbox are made of composite materials based on high-temperature wear-resistant plastics.
• - 4 brushes 5.5 x 6 mm
• - Dimensions: 125 mm (length with shaft); 127 mm (hull width with gearbox); 130 mm (height)
• - Dimensions of the platform for mounting 109mm x 56mm;
• - Distance between mounting holes (centered): 95mm x 42mm;
• - Mounting holes are M6 threaded
• - Shaft length: 20mm
• - Shaft diameter: 12mm
• - The key and nut M8 fix the star on the shaft
• - Driven sprockets that fit the chain: any sprockets for bicycle transmissions
• - Double insulated cable length: 50 cm

• Size: 125mm x 127mm x 130mm

Engine parameters:

• Rated speed: 2800/3000 rpm
• Reduction factor: 6 to 1
• Actual speed: 450 rpm.
• star 13 teeth (step 428)
• Applicable chain: 428 chain
• Load capacity: about 200 kg
• Phase: 120 degrees
• General dimensions 240*150 mm
• Fit size
• Cable length 1m.
• Size: 226mm x 153mm x 153mm

Specifications:
• Model Number: 120100
• Type: brushless motor
• KV: 50
• Maximum Power: 25 kW
• Max AMP: 200A
• ESC: 380A
• Max. voltage: 100V
• Size: 120x120 (without the shaft)
• Stator: 60 mm
• Weight: 4 kg
• Shaft: 10 mm

• Size: 120mm x 120mm x 120mm

Main parameters of the motor-wheel

• Motor type: geared
• Mounting location: front wheel
• Voltage: 48 V
• Motor-wheel power: 350 W
• Maximum speed: up to 45 km/h
• Landing place width: 100 mm
• Axle: 10x12 mm
• Number of holes for spokes: 36
• Motor-wheel weight: 3 kg
• Disc brake mount: no
• Maximum permissible current: 18 A
• Peak power: 950 W
• Size: 160mm x 160mm x 120mm

• Applicability: suitable for many electric scooters, electric bicycles, in runways homemade
• Model: MY1025
• Rated voltage: 24v
• Rated power: 250 W
• Peak power: 500W
• Rated current: 14A
• Short-time current: 21A
• Nominal speed: 2750 rpm. (under load less than 25%)
• Maximum efficiency 80%
• Cooling: passive (heat dissipation by the body)
• Diameter: 10.8 cm
• Shaft length: 2.6 cm
• Shaft diameter: 8mm
• Distance between mounting holes (center): 95mm x 42mm;
• Number of teeth on the sprocket: 11 for the SC-2 chain (The star on the shaft is attached using a spacer and nut M8)
• Cable length: Approx. 34 cm (2 (black and red))
• Weight: 1.89 kg

• Size: 108mm x 108mm x 100mm

Main parameters of the motor-wheel

• Motor type: geared
• Installation location: rear wheel (under the cassette)
• Voltage: 48 V
• Motor-wheel power: 500 W
• Maximum speed: up to 45 km/h
• Landing place width: 135 mm
• Axle: 10x12 mm
• Number of holes for spokes: 36
• Motor-wheel weight: 3.5 kg
• Disc brake mount: yes
• Maximum permissible current: 25 A
• Peak power: 1300 W
• Size: 165mm x 165mm x 160mm

Main parameters of the motor-wheel

• Motor type: geared
• Mounting location: front wheel
• Voltage: 36 V
• Motor-wheel power: 350 W
• Maximum speed: up to 45 km/h
• Landing place width: 100 mm
• Axle: 10x12 mm
• Number of holes for spokes: 36
• Motor-wheel weight: 3 kg
• Disc brake mount: no
• Maximum permissible current: 18 A
• Peak power: 950 W
• Size: 165mm x 165mm x 140mm

Main parameters of the motor-wheel

• Motor type: geared
• Mounting location: front wheel
• Voltage: 36 V
• Motor-wheel power: 350 W
• Maximum speed: up to 35 km/h
• Landing place width: 100 mm
• Axle: 10x12 mm
• Number of holes for spokes: 36
• Motor-wheel weight: 3 kg
• Disc brake mount: yes
• Maximum permissible current: 18 A
• Peak power: 750 W
• Size: 165mm x 165mm x 140mm

Main parameters of the motor-wheel

• Motor type: geared
• Installation location: rear wheel (under the rattle)
• Voltage: 48 V
• Motor-wheel power: 500 W
• Maximum speed: up to 45 km/h
• Landing place width: 135 mm
• Axle: 10x12 mm
• Number of holes for spokes: 36
• Motor-wheel weight: 3.5 kg
• Disc brake mount: yes
• Maximum permissible current: 25 A
• Peak power: 1300 W
• Size: 158mm x 195mm x 158mm

• Rated operational voltage 36 v
• Power Rating 350 w
• Maximum torque 21.8 N.m
• Weight 2.7 kg
• Electric Motor 3-Phase AC (BLDC)
• Hall sensor control circuit
• Maximum speed of an electric bike at 36v 35km / h
• Used spoke diameter: 2.4 - 2.8 mm
• Temperature range: -25... + 45 ° C

• Rated operational voltage 48 v
• Rated power 1000 w
• Maximum torque 21.8 N.m
• Weight 5.7 kg
• Electric Motor 3-Phase AC (BLDC)
• Hall sensor control circuit
• Maximum speed of an electric bike at 48v 55km / h
• Used spoke diameter: 2.4 - 2.8 mm
• Temperature range: -25... + 45 ° C

• Rated operational voltage 36\48 v
• Rated Power 500 w
• Maximum torque 21.8 N.m
• Weight 3.9 kg
• Electric Motor 3-Phase AC (BLDC)
• Hall sensor control circuit
• Maximum speed of an electric bike at 48v 45km / h
• Used spoke diameter: 2.4 - 2.8 mm
• Temperature range: -25... + 45 ° C

• Rated operational voltage 48 v
• Rated Power 1500 w
• Maximum torque 21.8 N.m
• Weight 6.2 kg
• Electric Motor 3-Phase AC (BLDC)
• Hall sensor control circuit
• Maximum speed of an electric bike at 48v 65km / h
• Used spoke diameter: 2.4 - 2.8 mm
• Temperature range: -25... + 45 ° C

• Rated operating voltage 48 V
• Rated power 500 w
• The maximum torque is 21.8 Nm
• Weight 5.7 kg
• Electric motor Valve, 3-phase, alternating current (BLDC)
• Hall sensors control circuit
• The maximum speed of an electric bike at 48V is 45km / h
• The diameter of the spoke is 2.4 - 2.8 mm
• Temperature range: -25... + 45 C °