Wireless FPV Transmitter TS582000 5.8G 2000MW
- Transmission characteristics
- Output power: 2000 mW
- Operating voltage: 8 V-25 V (2S-6S)
- Operating current: 800 mA (12 V testing)
- Channel: 24CH
- Video format: NTSC/PAL
- Output voltage: 5V/input voltage (jumper selection)
- Antenna interface: SMA (internal male thread)
- Size: 56mm x 26mm x 25mm
| Count | Price | |||
|---|---|---|---|---|
| From | 1 | шт | 2352 | грн |
| From | 2 | шт | 2305 | грн |
| From | 6 | шт | 2258 | грн |
| From | 16 | шт | 2235 | грн |
Переглянути відгуки (0)
Wireless FPV Transmitter TS582000 5.8G 2000MW
Two output voltages. It can supply power to cameras with 5V and wide voltage. Select the output voltage with a three-point jumper and check the wiring diagram drawing for operation details.
1. The jumper is shorted to the two points on the right, and the output is 5V at this time.
2. The jumper is closed to the two points on the left, and the input voltage of the power supply is output at this time.
Three diagrams of the actual wiring diagram
Wining diagram 1: suitable for a micro camera with a voltage of 3.3-5V and a current of less than 100mA. If there are no conditions to verify that the camera meets the above voltage and current conditions, this connection method is prohibited, otherwise there is a high risk of damage to the transmitter.
Wiring diagram 2: Suitable for a camera with a voltage of 5-25V, and this diagram is universal.
Wiring diagram 3: Suitable for the camera of diagram 2, which cannot be used at low voltage and diagram 1 cannot be used at high current, such as a moving camera. This wiring scheme is universal and basically suitable for all cameras. The disadvantage is that the wiring is a bit more complicated.
Specifications:
Trademark: FARAJIAJ
Origin: mainland China
Certification: NONE
Type of accessories for drones: Data transmission system
.jpeg)
.jpeg)