Digital servo drive Dc 4.8 6V Mini 3 modes

Droyuke DC 4.8-6V Mini steering tester

It is possible to synchronize the control of the output signal of 4 servos and use it to compare performance Steering control The output signal of the steering servo can be as accurate as 2 μs (1 millisecond = 1000 microseconds), you can check the ability of the steering to respond to small changes

With the PPM signal check function on the display, the PPM input signal changes when the PPM synchronization signal is input to the servo.

Turns on automatically in manual mode (Manual) 20us

Analog servo signal cycle of 50 hours, frequency 50 Hz, rotary potentiometers to reduce or increase the output pulse width

"Select" button (Note: function of switching keys, circulation patterns)

1. S-1 manual mode (Manual)

2. S-2 bit mode (neutral)

3. S-3 automatic mode (Automatic)

Pulse width-1 key. 50H analog servo signal cycle 20us frequency 50Hz

2. 125H digital steering signal cycle 8us frequency 125Hz

3. 250H digital servo signal cycle 4μs frequency 250Hz

Note:

Connect the digital or analog signal button to the appropriate servo, and then connect the steering servo to prevent damage.

Package Included:

1 x digital servo tester / ESC consistency tester